Nm to Ft-Lbs Conversion Chart: Full Table (1 to 1000 Nm)
Complete Nm to ft-lbs conversion chart with every value from 1 to 1000 Nm, the simple formula, and common torque specs for cars, bikes and machinery.
If you work with torque specs, you have run into this problem. The manual lists a value in Newton-meters, your torque wrench reads in foot-pounds, and you need the converted number now, not after doing math on a greasy phone screen. This chart solves that. Below you will find every Nm value from 1 to 100 converted to ft-lbs, plus the higher ranges in clean steps up to 1000 Nm, all calculated with the exact conversion constant. Bookmark this page and it becomes the only chart you need.
How This Chart Works
Every value in these tables uses the exact constant 1 Nm = 0.7375621493 ft-lbs. This is not a rounded shortcut. It is the precise figure derived from the definitions of the meter, the foot, and the pound-force, the same constant used by professional conversion tools. If you want to check any number yourself, the formula is simple:
ft-lbs = Nm × 0.7375621493
For quick mental estimates, multiplying by 0.74 gets you close. For actual fastener work, use the chart or the formula, because a small rounding error at low torque becomes a big one at high torque. A spec of 200 Nm converted with a rough 0.75 factor gives you 150 ft-lbs instead of the correct 147.51 ft-lbs, and that difference is enough to matter on a wheel or an engine component.
All values in the charts are rounded to two decimal places, which is more precision than any standard torque wrench can apply anyway. If your value falls between two rows, or you need more decimal places, use the free Nm to ft-lbs converter and it will calculate the exact figure as you type.
Nm to Ft-Lbs Chart: 1 to 50 Nm
This is the precision range. Small fasteners, bicycle components, spark plugs, valve covers, and electronics housings all live here, and this is the range where over-torquing does the most damage because the fasteners are small and the materials are often aluminium or carbon fibre.
| Nm | Ft-Lbs | Nm | Ft-Lbs |
|---|---|---|---|
| 1 | 0.74 | 26 | 19.18 |
| 2 | 1.48 | 27 | 19.91 |
| 3 | 2.21 | 28 | 20.65 |
| 4 | 2.95 | 29 | 21.39 |
| 5 | 3.69 | 30 | 22.13 |
| 6 | 4.43 | 31 | 22.86 |
| 7 | 5.16 | 32 | 23.60 |
| 8 | 5.90 | 33 | 24.34 |
| 9 | 6.64 | 34 | 25.08 |
| 10 | 7.38 | 35 | 25.81 |
| 11 | 8.11 | 36 | 26.55 |
| 12 | 8.85 | 37 | 27.29 |
| 13 | 9.59 | 38 | 28.03 |
| 14 | 10.33 | 39 | 28.76 |
| 15 | 11.06 | 40 | 29.50 |
| 16 | 11.80 | 41 | 30.24 |
| 17 | 12.54 | 42 | 30.98 |
| 18 | 13.28 | 43 | 31.72 |
| 19 | 14.01 | 44 | 32.45 |
| 20 | 14.75 | 45 | 33.19 |
| 21 | 15.49 | 46 | 33.93 |
| 22 | 16.23 | 47 | 34.67 |
| 23 | 16.96 | 48 | 35.40 |
| 24 | 17.70 | 49 | 36.14 |
| 25 | 18.44 | 50 | 36.88 |
The smallest values deserve a special warning. Below 10 Nm, a quarter turn too far can crush a carbon fibre seatpost or strip a thread in a soft aluminium casting, and the damage is done before the wrench feels tight. This is why bicycle mechanics and anyone working on precision assemblies use small-range torque wrenches that start at 2 Nm instead of relying on a large automotive wrench at the bottom of its scale, where its accuracy is at its worst. If your spec is in single figures, find it in the first rows of the chart, for example 8 Nm = 5.90 ft-lbs, and treat it with the same care as the biggest value on the page.
Nm to Ft-Lbs Chart: 51 to 100 Nm
The middle range covers a large share of everyday automotive work: brake caliper bolts, suspension fasteners, larger engine accessories, and many drivetrain components.
| Nm | Ft-Lbs | Nm | Ft-Lbs |
|---|---|---|---|
| 51 | 37.62 | 76 | 56.05 |
| 52 | 38.35 | 77 | 56.79 |
| 53 | 39.09 | 78 | 57.53 |
| 54 | 39.83 | 79 | 58.27 |
| 55 | 40.57 | 80 | 59.00 |
| 56 | 41.30 | 81 | 59.74 |
| 57 | 42.04 | 82 | 60.48 |
| 58 | 42.78 | 83 | 61.22 |
| 59 | 43.52 | 84 | 61.96 |
| 60 | 44.25 | 85 | 62.69 |
| 61 | 44.99 | 86 | 63.43 |
| 62 | 45.73 | 87 | 64.17 |
| 63 | 46.47 | 88 | 64.91 |
| 64 | 47.20 | 89 | 65.64 |
| 65 | 47.94 | 90 | 66.38 |
| 66 | 48.68 | 91 | 67.12 |
| 67 | 49.42 | 92 | 67.86 |
| 68 | 50.15 | 93 | 68.59 |
| 69 | 50.89 | 94 | 69.33 |
| 70 | 51.63 | 95 | 70.07 |
| 71 | 52.37 | 96 | 70.81 |
| 72 | 53.10 | 97 | 71.54 |
| 73 | 53.84 | 98 | 72.28 |
| 74 | 54.58 | 99 | 73.02 |
| 75 | 55.32 | 100 | 73.76 |
Nm to Ft-Lbs Chart: 110 to 500 Nm
These are the heavy-duty values. Wheel lug nuts on most passenger cars sit between 100 and 140 Nm, axle nuts and crankshaft bolts go higher, and commercial and industrial machinery works in this range every day. If you are converting 140 Nm to ft-lbs for wheel bolts, you will find it in the first rows here: 103.26 ft-lbs.
| Nm | Ft-Lbs | Nm | Ft-Lbs |
|---|---|---|---|
| 110 | 81.13 | 310 | 228.64 |
| 120 | 88.51 | 320 | 236.02 |
| 130 | 95.88 | 330 | 243.40 |
| 140 | 103.26 | 340 | 250.77 |
| 150 | 110.63 | 350 | 258.15 |
| 160 | 118.01 | 360 | 265.52 |
| 170 | 125.39 | 370 | 272.90 |
| 180 | 132.76 | 380 | 280.27 |
| 190 | 140.14 | 390 | 287.65 |
| 200 | 147.51 | 400 | 295.02 |
| 210 | 154.89 | 410 | 302.40 |
| 220 | 162.26 | 420 | 309.78 |
| 230 | 169.64 | 430 | 317.15 |
| 240 | 177.01 | 440 | 324.53 |
| 250 | 184.39 | 450 | 331.90 |
| 260 | 191.77 | 460 | 339.28 |
| 270 | 199.14 | 470 | 346.65 |
| 280 | 206.52 | 480 | 354.03 |
| 290 | 213.89 | 490 | 361.41 |
| 300 | 221.27 | 500 | 368.78 |
Nm to Ft-Lbs Chart: 550 to 1000 Nm
Above 500 Nm you are in heavy machinery, commercial truck, and industrial territory. These values need serious equipment, but the conversion works exactly the same way.
| Nm | Ft-Lbs | Nm | Ft-Lbs |
|---|---|---|---|
| 550 | 405.66 | 800 | 590.05 |
| 600 | 442.54 | 850 | 626.93 |
| 650 | 479.42 | 900 | 663.81 |
| 700 | 516.29 | 950 | 700.68 |
| 750 | 553.17 | 1000 | 737.56 |
The Most Common Torque Values at a Glance
Most people who land on this page are looking for one of a handful of values. These are the conversions that come up again and again in workshops, with the jobs they belong to:
- 25 Nm = 18.44 ft-lbs — oil drain plugs and spark plugs on many passenger cars
- 30 Nm = 22.13 ft-lbs — spark plugs in cast iron and heavy-duty aluminium heads
- 100 Nm = 73.76 ft-lbs — wheel lug nuts on smaller cars, caliper bracket bolts
- 120 Nm = 88.51 ft-lbs — wheel lug nuts on many sedans and SUVs
- 200 Nm = 147.51 ft-lbs — axle nuts, larger suspension and drivetrain fasteners
- 500 Nm = 368.78 ft-lbs — heavy-duty and commercial applications
Always confirm the exact specification in your vehicle’s service manual before applying torque. The chart gives you the conversion, the manual gives you the correct target for your specific car, bike, or machine.
Converting Ft-Lbs Back to Nm
Sometimes the conversion runs the other way: your manual is in ft-lbs and your wrench is in Nm. The reverse formula is Nm = ft-lbs × 1.3558179483. Here are the common values:
| Ft-Lbs | Nm | Ft-Lbs | Nm |
|---|---|---|---|
| 1 | 1.36 | 80 | 108.47 |
| 5 | 6.78 | 90 | 122.02 |
| 10 | 13.56 | 100 | 135.58 |
| 20 | 27.12 | 120 | 162.70 |
| 25 | 33.90 | 140 | 189.81 |
| 30 | 40.67 | 150 | 203.37 |
| 40 | 54.23 | 200 | 271.16 |
| 50 | 67.79 | 250 | 338.95 |
| 60 | 81.35 | 300 | 406.75 |
| 70 | 94.91 | 400 | 542.33 |
How to Convert a Value That Is Not on the Chart
Charts cover the standard values, but torque specs are not always round numbers. If your manual says 87 Nm or 132 Nm, you have two options. First, find the nearest rows and use the formula for the exact figure: multiply by 0.7375621493. Second, and faster, enter the value into the online converter and get the result instantly, in both directions, with as many decimal places as you need. For a one-off odd value the formula is fine. For a full set of specs, for example converting an entire torque table from a European manual, the converter saves real time and removes the risk of a slipped digit.
Frequently Asked Questions
How many ft-lbs is 100 Nm?
100 Nm is 73.76 ft-lbs (100 × 0.7375621493 = 73.756, rounded to 73.76). This is a common wheel lug nut specification for smaller passenger cars.
What is 25 Nm in ft-lbs?
25 Nm is 18.44 ft-lbs. You will see this value on oil drain plugs and spark plugs across many Toyota, Honda, and Hyundai models.
Why does the chart use 0.7375621493 instead of just 0.74?
Because torque is a safety-relevant measurement. The short factor is fine for a rough idea, but the error grows with the value: at 500 Nm, using 0.74 instead of the exact constant overstates the result by more than 1.2 ft-lbs. The exact constant costs you nothing, so there is no reason to accept the error.
Is a foot-pound the same as a pound-foot?
They describe the same amount of torque in workshop use, and the conversion is identical. Strictly, engineers write lb-ft for torque to avoid confusion with the foot-pound as a unit of energy, but when you are converting a torque spec, Nm to ft-lbs and Nm to lb-ft give you the same number.
Can I print this chart?
Yes. The tables are laid out to print cleanly, and many workshops keep a copy near the toolbox for the values they use daily. For anything beyond the printed ranges, the converter handles it in seconds.
Final Word
A conversion chart earns its place when it is complete, accurate, and fast to scan. This one covers every value from 1 to 100 Nm individually and the working ranges up to 1000 Nm, all with the exact constant. Keep it bookmarked next to your torque converter, confirm your spec in the manual, and you will never stand in a workshop doing decimal math again.
Written by
Shaheer Akram
Torque conversion specialist at Nm to Foot Pounds Converter, building accurate, accessible tools for mechanics, engineers, and DIYers.