Featured image for: How to Read a Torque Wrench: Click, Beam, and Digital Scales
Torque Guides November 13, 2026 9 min read

How to Read a Torque Wrench: Click, Beam, and Digital Scales

Learn how to read a torque wrench correctly: click-type scales, beam gauges, digital displays, and dual Nm and ft-lb scales, with examples.

Shaheer Akram Torque conversion specialist

A torque wrench only protects your fasteners if you read it correctly. The tightening technique can be perfect and still produce the wrong torque if you misread the scale by one row, forget to add the small scale, or read the gauge from an angle. This guide is about reading the numbers: how the scales on click-type, beam-type, and digital torque wrenches work, how to set a value, and the reading mistakes that cause wrong torque. For the tightening process itself, the steps, the technique, and the storage rules, read How to Use a Torque Wrench Correctly. This article covers only the reading.

Why reading the scale is a skill of its own

Most torque wrenches do not have a single number to read. A click-type wrench has two scales that must be added together. A beam wrench has a needle and a gauge that must be read straight on. A digital wrench has a display with modes and units that can be set wrong. Each design has its own way of going wrong, and the errors are silent: the wrench does not tell you that you read it wrong, it simply clicks at the wrong value or shows a number you misread. Learning to read each type properly takes a few minutes and prevents the most common torque errors in home workshops.

Click-type wrenches: two scales to add

A click-type torque wrench has a main scale printed on the handle and a smaller micrometer scale on the rotating grip at the bottom. To read the setting, you add the two together. The main scale shows the larger steps, usually in increments of 10 Nm or 10 ft-lb depending on the wrench, and the micrometer scale shows the smaller steps, usually 0.5 or 1 Nm per mark. Here is how it works in practice: suppose the main scale shows 60 and the micrometer scale shows 4. The setting is 64 Nm. If the micrometer shows 4.5, the setting is 64.5 Nm. The exact step size varies by model, so check the markings on your wrench before you start, but the method is always the same: main scale plus micrometer scale.

To set a value, turn the grip until the main scale shows the largest step below your target, then turn the micrometer scale to add the remainder. For a target of 25 Nm, set the main scale to 20 and the micrometer to 5. For a target of 100 Nm, set the main scale to 100 and the micrometer to 0. Always read the scales again after setting, before you start work, because it is easy to be one micrometer mark off and not notice until the bolt is already tightened.

One detail catches many people: the micrometer scale wraps around. When you turn past the last mark, it returns to zero and the main scale advances by one step. If you are setting 30 Nm and the micrometer passes zero, the main scale should now show 30 and the micrometer 0, not 20 and 10. Check both scales together, not one at a time, and the wrap-around will never confuse you.

Beam-type wrenches: read the needle straight on

A beam-type torque wrench has a needle that moves across a fixed gauge as you pull. There is nothing to set and nothing to add: you read the number the needle points to at the moment of maximum pull. The skill here is position. Read the gauge with your eyes level with the needle, not from above or from the side. Reading from an angle is called parallax error, and it can shift your reading by several units, which on a small fastener is the difference between correct and stripped. If the gauge is hard to read in your working position, stop, reposition yourself or the wrench, and read again. Never guess a beam reading from a bad angle.

Beam wrenches are simple and never lose calibration the way click wrenches can, but they demand your attention during the pull: you must watch the needle while you apply force, which takes practice. Work slowly, keep your eyes on the gauge, and stop the moment the needle reaches your target. If you overshoot, release and start again rather than trying to judge how far past the mark you went.

Digital wrenches: read the display, check the mode

A digital torque wrench shows the live torque on a display, usually with a beep or a light at the target value. Reading it is easy, but the settings are where mistakes happen. Before you start, check three things on the display: the unit (Nm or ft-lb), the mode (track or peak), and the target value. Track mode shows the live value as you pull, falling back to zero when you release. Peak mode holds the highest value reached, which is what you want when you cannot watch the display during the pull. If the mode is wrong, the display can show you a number that does not mean what you think it means, even though the wrench itself is working perfectly.

Also check the unit every time you pick the wrench up. Many digital wrenches remember the last unit used, and if the previous job was in ft-lb while your manual specifies Nm, the display will show a number in the wrong unit. A reading of 100 on the display means 100 ft-lb in one unit and 100 Nm in the other, and those are very different amounts of torque: 100 ft-lb is 135.58 Nm, while 100 Nm is 73.76 ft-lb. One glance at the unit indicator prevents the error entirely.

Dual scales: Nm and ft-lb on the same wrench

Many click-type and beam wrenches carry both units on the same scale: one row for Nm and one row for ft-lb. The rows are offset from each other, and reading the wrong row is the single most common reading mistake. Before you set or read anything, decide which unit your manual uses, find that row, and ignore the other one completely. If your manual specifies 25 Nm, use the Nm row. If it specifies 18 ft-lb, use the ft-lb row. Do not read one row and convert in your head while setting the wrench: convert first with the homepage converter, write the converted value down, and then set the wrench to that value on the correct row.

A useful check: Nm values are always larger than the same torque in ft-lb. If you converted 25 Nm and got 18.44 ft-lb, the ft-lb number is smaller, which is correct. If your conversion ever gives a larger number when going from Nm to ft-lb, you have multiplied by the wrong factor and need to redo it. The factors are 1 Nm = 0.7375621493 ft-lb and 1 ft-lb = 1.3558179483 Nm.

Quick reference: common settings in both units

The table below shows the values people set most often, in both units. Use it to check your reading before you start work.

Newton-meters (Nm)Foot-pounds (ft-lb)
5 Nm3.69
8 Nm5.90
10 Nm7.38
12 Nm8.85
15 Nm11.06
20 Nm14.75
25 Nm18.44
30 Nm22.13
35 Nm25.81
40 Nm29.50
50 Nm36.88
60 Nm44.25
80 Nm59.00
100 Nm73.76
120 Nm88.51

Common reading mistakes

  • Forgetting to add the micrometer scale on a click wrench. Setting only the main scale leaves the wrench several units below your target.
  • Reading the wrong row on a dual-scale wrench. The Nm and ft-lb rows sit close together, and one glance at the wrong row sets the wrong torque.
  • Parallax error on a beam wrench. Reading the needle from above or from the side shifts the apparent value by several units.
  • Not checking the unit on a digital wrench. The display remembers the last unit used, and the previous job may have used the other one.
  • Reading the scale upside down. On some wrenches the scale reads correctly only from one side. Turn the wrench, not your head, to read it.
  • Setting the wrench by memory instead of reading the scales. Always read both scales after setting, before the first bolt.

How to check your reading is right

Three habits keep your readings honest. First, set the value, then read it back out loud: main scale plus micrometer scale, or the digital display with its unit. Saying the number forces you to actually look at it. Second, check the value against the reference table above or the conversion chart before you start. If the table and your wrench disagree, trust neither until you have re-read the scales. Third, return the wrench to its lowest setting after use. This is a storage rule, not a reading rule, but a wrench left at a high setting loses calibration, and a wrench that has lost calibration gives readings you cannot trust, however carefully you read them.

Frequently asked questions

My click wrench has no micrometer scale. How do I set it?

Some smaller or cheaper click wrenches have only a main scale, and you set them to the nearest mark on that scale. If your target falls between marks, set to the nearest mark and accept the small difference, or use a wrench with a finer scale. Do not estimate a position between marks by eye and treat it as exact.

Why does my wrench scale start above zero?

Because a torque wrench is only accurate in the middle of its range. A wrench rated 20 to 100 Nm cannot reliably measure 5 Nm, so the scale starts at 20. If your target is below the lowest mark, you need a smaller wrench, not a guess at the bottom of the scale.

How do I know my wrench reads correctly?

The only certain way is calibration against a known standard, which tool shops and calibration services offer. As a rough check, compare two wrenches on the same fastener: if they disagree by more than a few percent, one of them needs calibration. For more on accuracy and calibration, see the companion guide on torque wrench accuracy and calibration.

Can I read a beam wrench in poor light?

Not reliably. The needle and gauge need clear light to read without parallax error. Use a headlamp or move the work into better light rather than guessing the needle position.

Final word

Reading a torque wrench is a small skill with a large payoff: add the two scales on a click wrench, read a beam gauge straight on, and check the unit and mode on a digital display. Do those three things, read the value back before the first bolt, and the wrench will give you the torque you actually asked for. For the tightening technique itself, read How to Use a Torque Wrench Correctly.

Written by

Shaheer Akram

Torque conversion specialist at Nm to Foot Pounds Converter, building accurate, accessible tools for mechanics, engineers, and DIYers.