How to Convert Ft-Lbs to Nm: Formula and Examples
Convert ft-lbs to Nm with the exact formula, worked examples and a full conversion table. 1 ft-lb = 1.3558179483 Nm.
Foot-pounds (ft-lb) and Newton-meters (Nm) both measure torque, but they belong to different measurement systems, and you will constantly need to convert between them. American car manuals, older workshop guides, and many US torque wrenches use ft-lb. European and Japanese manuals, bicycle components, and most modern torque wrenches use Nm. This guide teaches the reverse conversion properly: the exact formula, worked examples, a mental shortcut, and the mistakes that produce wrong answers.
The formula
One foot-pound equals 1.3558179483 Newton-meters. So the formula is: Newton-meters = foot-pounds multiplied by 1.3558179483. Written out: Nm = ft-lb x 1.3558179483. This factor is the reciprocal of the Nm to ft-lb factor (0.7375621493), which is why the two conversions mirror each other exactly.
The factor comes from the definitions of the units. One pound of force equals 4.4482216 newtons, and one foot equals 0.3048 meters. Multiply those together and one foot-pound equals 1.3558179483 Newton-meters. You do not need to work this out yourself, but it is useful to know the number is exact, not an approximation somebody chose.
Step by step
- Take the ft-lb value from your manual or specification.
- Multiply it by 1.3558179483.
- Round the answer to two decimal places for most workshop use.
- Set your torque wrench to the converted Nm value, or check it against the wrench’s dual scale if it has one.
Worked examples
Example 1: convert 100 ft-lb to Nm. Multiply 100 by 1.3558179483, which gives 135.5818. Rounded to two decimals, 100 ft-lb equals 135.58 Nm. This is a very common value: many wheel lug nuts and larger fasteners sit near it.
Example 2: convert 50 ft-lb to Nm. Multiply 50 by 1.3558179483, which gives 67.7909. Rounded, 50 ft-lb equals 67.79 Nm. If your European car’s manual specifies a fastener at 68 Nm and your wrench reads ft-lb, you now know you are looking at roughly 50 ft-lb.
Example 3: convert 25 ft-lb to Nm. Multiply 25 by 1.3558179483, which gives 33.8954. Rounded, 25 ft-lb equals 33.90 Nm. This range covers many smaller automotive fasteners and some motorcycle parts.
Example 4: convert 150 ft-lb to Nm. Multiply 150 by 1.3558179483, which gives 203.3727. Rounded, 150 ft-lb equals 203.37 Nm. Heavy truck lug nuts and large suspension bolts live in this range, and this is where getting the direction right matters most: dividing here would give a dangerously wrong number.
Quick mental estimate
When you do not have a calculator, multiply by 1.36 instead of 1.3558179483. For 100 ft-lb the estimate gives 136 Nm instead of 135.58, which is close enough to choose the right wrench or check a specification. Another rough rule is to add one third to the ft-lb value: 100 plus 33 is 133, which is a little low but in the right area. As with all estimates, use them only for checking. For the value you actually tighten to, use the exact formula or the homepage converter.
Conversion table
The table below covers the values people look up most often. For any other value, use the formula above or the homepage converter.
| Foot-pounds (ft-lb) | Newton-meters (Nm) |
|---|---|
| 1 ft-lb | 1.36 |
| 5 ft-lb | 6.78 |
| 10 ft-lb | 13.56 |
| 15 ft-lb | 20.34 |
| 20 ft-lb | 27.12 |
| 25 ft-lb | 33.90 |
| 30 ft-lb | 40.67 |
| 35 ft-lb | 47.45 |
| 50 ft-lb | 67.79 |
| 70 ft-lb | 94.91 |
| 80 ft-lb | 108.47 |
| 100 ft-lb | 135.58 |
| 120 ft-lb | 162.70 |
| 150 ft-lb | 203.37 |
| 200 ft-lb | 271.16 |
| 250 ft-lb | 338.95 |
| 400 ft-lb | 542.33 |
| 500 ft-lb | 677.91 |
Common mistakes
- Multiplying by 0.74 instead of 1.36. That is the Nm to ft-lb factor, the wrong direction. It gives a number far smaller than the correct answer, and under-tightening a wheel or suspension bolt is dangerous.
- Dividing by 1.3558179483. Division converts Nm to ft-lb, not ft-lb to Nm. If your answer comes out smaller than the ft-lb value you started with, you have gone the wrong way: Nm values are always larger than the same torque in ft-lb.
- Forgetting inch-pounds. If your specification is in inch-pounds, convert to foot-pounds first by dividing by twelve, then multiply by 1.3558179483. Going straight from inch-pounds with the ft-lb factor gives an answer twelve times too large.
- Rounding the factor to 1.3 or 1.4 and using it for final settings. Rough factors are fine for estimates but not for tightening. A 3 percent error on a 150 ft-lb bolt is 4.5 ft-lb, which is enough to matter on critical fasteners.
- Assuming lb-ft is different. Pound-feet (lb-ft) and foot-pounds (ft-lb) are the same unit, so the same formula applies to both spellings.
When you need this conversion
The most common situation is reading an American manual with a metric wrench. Your wrench shows Nm, the manual says ft-lb, and you need the conversion before you start. It also comes up with bicycle and motorcycle parts, which are almost always specified in Nm even in the United States, and when comparing two specifications written in different units, for example checking whether a 100 Nm fastener matches a 74 ft-lb specification (it does: 100 Nm is 73.76 ft-lb).
Reading a dual-scale torque wrench
Many torque wrenches show both units on the same scale: foot-pounds on one row and Newton-meters on the other. If your wrench has this, you may not need to convert at all: find the ft-lb row, set the value your manual gives, and tighten. But check the alignment carefully, because the two scales are offset and it is easy to read the wrong row under poor light. If your wrench shows only Nm, convert first with the formula, write the converted value on a piece of tape stuck to the wrench handle if you are doing several bolts, and set the wrench once. Converting twice, once on paper and once in your head, is how errors creep in.
A related tip: set the wrench to the converted value and then check it against the table in this guide before you start. If the table and your calculation disagree, trust neither until you have redone the multiplication. A single wrong digit in the factor changes every bolt on the job, so the thirty seconds spent double-checking are worth it.
Comparing specifications in different units
Conversion is not only for setting a wrench. It is also how you compare two specifications written in different units, which happens whenever you cross-check a manual against a video, a forum post, or a second manual. Suppose one source says a fastener needs 68 Nm and another says 50 ft-lb. Are they the same? Multiply 50 by 1.3558179483 and you get 67.79 Nm, so yes, they agree within rounding. Suppose instead one source says 68 Nm and another says 68 ft-lb. Those are not the same at all: 68 ft-lb is 92.20 Nm, which is more than a third higher. Whenever two sources give the same number in different units, convert before you believe they agree.
The same check protects you against a common workshop error: a torque wrench set to the right number in the wrong unit. If your wrench is set to 50 and you meant 50 ft-lb but the wrench is reading Nm, you are applying only 36.88 ft-lb, which is badly under-torqued. If the reverse happens, you are applying 67.79 ft-lb when you meant 50, which is badly over-torqued. Always confirm which unit the wrench is displaying before the first pull.
Frequently asked questions
Is 1 ft-lb the same as 1 Nm?
No. 1 ft-lb equals 1.36 Nm, so the foot-pound is the larger unit. A torque of 100 ft-lb is much more than 100 Nm: it equals 135.58 Nm.
Which direction do I multiply?
Both conversions multiply, but by different factors. Nm to ft-lb multiplies by 0.7375621493 (answer gets smaller). Ft-lb to Nm multiplies by 1.3558179483 (answer gets larger). A quick check: your Nm answer should always be larger than the ft-lb value you started with.
Can I just use the converter instead?
Yes. The homepage converter converts in both directions instantly, and the conversion chart covers Nm values from 1 to 1000. Use the formula when you want to understand the number, and the converter when you want speed.
Can I use this conversion for bicycle specifications?
Yes, the formula is the same for every kind of torque. Bicycle parts are usually specified in Nm, so you will most often convert ft-lb to Nm when your only reference is an American guide. For example, a bicycle stem bolt at 5 ft-lb would be 6.78 Nm, which sits inside the usual 5 to 8 Nm stem range.
What about kgf-m, the unit in some older manuals?
Kilogram-force meters convert to Nm by multiplying by 9.80665. If your manual gives kgf-m and your wrench reads Nm, use that factor. If you then need ft-lb, convert the Nm figure with the formula in this guide rather than chaining rough factors together.
Final word
Converting ft-lb to Nm is one multiplication: ft-lb times 1.3558179483. Remember that the Nm answer is always larger than the ft-lb value, use estimates only for checking, and verify the final value before tightening. For the opposite direction, the companion guide on converting Nm to ft-lb uses the reciprocal factor of 0.7375621493.
Written by
Shaheer Akram
Torque conversion specialist at Nm to Foot Pounds Converter, building accurate, accessible tools for mechanics, engineers, and DIYers.